Junta de Expansão de Ponte com Material Elastomérico
Modelo: Displacement 60MM-330MM
Descrição do produto
Sales Manager: Ms Jenny Lee
Mobile Phone: +86-18678456530
Companies: Zaoqiang Dacheng Rubber Co.,Ltd.
DESCRIPTON OF THE RUBBER EXPENSION JOINT
Rubber Bridge Expansion Joint system comprises of 8 NO. Standard models designed to accommodate
movement up to 330mm by shear deformation of the elastomer between the steel components. Each
model of our Rubber Bridge Expansion Joint incorporates steel angles designed to be bolted to the
structural deck and a steel bridging plate system which spans the open joint gap. The elastomer case is
highly resistant to oils, solvent spillage and the trafficked surface includes an anti-skid pattern for safety
having a rubber to rubber coefficient of static friction of 0.69. Each model of our Rubber Bridge Expansion
Joint is specifically designed to accommodate horizontal and skew movement and will also
accommodate vertical movement due to rotation of up to 6mm.
|FEATURES OFTHE RUBBER EXPENSION JOINT|
As one of the company's main series of products, our rubber expansion joint stands most competitive
position in the domestic & abroad markets of same industry by its convenient installation, stable running,
waterproof, dustproof, little noise, light weight, and low cost and other features.
Rubber Bridge Expansion Joint is the flexible transformation when using high elasticity to adapt the
change of temperature. And our Rubber Bridge Expansion Joint got good reputation of bridge
engineering by its convenient installation,stable running, waterproof, dustproof, little noise, light weight,
and low cost and other features.
APPLICATION OF RUBBER EXPENSION JOINT
Rubber Bridge Expansion Joint is used in Highway bridge decks,Service ramps,Multi- storey car parks
and so on. Rubber Bridge Expansion Joint is used to prevent buildings or bridges appear some cracks
because of climate change.
| CONSTRUCTION PROGRAMS OF RUBBER EXPENSION JOINT|
(1) Set out and cut Rubber Bridge Expansion Joint.
(2) Excavate and clean the Rubber Bridge Expansion Joint area.
(3) Drill holes to locate the anchor bolts.
(4) Place the rebar mat and mold.
(5) Pour bottom concrete layer.
(6) Install comb-shaped steel plate.
(7) Pour side concrete.
(8) Maintenance the Rubber Bridge Expansion Joint.
TYPES OF BRIDGE EXPENSION JOINT
1. Modular Rubber Bridge Expansion Joint
2. SGF series Rubber Bridge Expansion Joint
3. TST bridge elastomeric expansion joint
4. TST seamless Rubber Bridge Expansion Joint
5. Steel finger Rubber Bridge Expansion Joint
|1. Max horizontal frictional resistance of
expansion and compression(KN/m)
|2. Max vertical deviation or deformation
of expansion and compression
|Name of defects||Quality standard|
|Skeleton steel exposed||Not allowed|
|Steel plate with crack or peel||Not allowed|
|Spray frost, brittle and crack||Not allowed|
|Obvious cracking without glue||Area is not more than 30 mm * 5 mm, depth is less
than 2mm defect.Per linear meter cannot appear 4
|Bubbles, impurities||Not more than 0.5% of the products' surface area.
Per place is not more than 25mm and the depth
is not more than 2mm
|Bolt positioning hole
deflection and cracking
|Connecting channel craze
and cannot close strictly.
|The position of steel plate and
angle steel after sawing
|The position of steel plate and angle steel must
be accurate. Plane position deviation is ±3 mm,
height position deviation is between -1mm and
|The bond of steel plate
|Steel plate and rubber binder should be solid
and without delamination phenomenon
Premium Related Products